Standard: 6-8 feet for wood fences
Average: $20-$40 per ft installed
How to Calculate Fence Materials
Posts
Formula: Posts = (Fence Length ÷ Post Spacing) + 1
Panels
Formula: Panels = Fence Length ÷ 8 (standard 8' panels)
Common Fence Spacings
- Privacy Fences: 6-8 feet post spacing
- Picket Fences: 8 feet post spacing
- Chain Link: 10 feet post spacing
Cost Considerations
- Wood Privacy: $20-$40 per linear foot
- Vinyl Privacy: $25-$45 per linear foot
- Chain Link: $15-$30 per linear foot
- Aluminum/Steel: $30-$50 per linear foot
Installation Tips
- Call 811 before digging to mark utilities
- Set posts in concrete for durability
- Use treated lumber for ground contact
- Stain or seal wood fences regularly
About This Calculator
Fence Calculator - Estimate Fence Materials & Cost
Calculate the materials needed to build a fence including posts, panels, pickets, rails, and concrete. Get estimates for privacy fences, picket fences, chain link, and more.
How to Use This Calculator
- Enter Fence Style: Privacy, picket, shadowbox, chain link
- Total Length: Total linear feet of fencing needed
- Post Spacing: Standard 6-8 feet for most fences
- Add Gates: Number and width of gates
- Get Results: Complete material list
Fence Material Calculations
Posts
Formula:
Posts = (Fence Length ÷ Post Spacing) + 1Panels
Formula:
Panels = Fence Length ÷ 8 (for standard 8' panels)Pickets
Varies by fence style:
- Privacy Fence: ~2.2 pickets per linear foot
- Picket Fence: ~2 pickets per linear foot
- Shadowbox: ~4.4 pickets per linear foot (both sides)
Fence Styles & Materials
| Style | Height | Posts Needed | Pickets Needed |
|---|---|---|---|
| Privacy Fence | 6' | Every 6-8' | ~2.2 per ft |
| Picket Fence | 4' | Every 8' | ~2 per ft |
| Shadowbox | 6' | Every 6-8' | ~4.4 per ft |
| Chain Link | 4-6' | Every 10' | N/A |
Concrete Requirements
- Post Hole Size: 12" diameter × 24" deep (typical)
- Volume Per Post: ~1.57 cubic feet (0.06 cubic yards)
- 80lb Bags Per Post: ~2 bags
- Total Concrete: Posts × 1.57 cubic feet
Cost Per Linear Foot
| Fence Type | Material Only | Installed |
|---|---|---|
| Wood Privacy | $10-$20/ft | $20-$40/ft |
| Vinyl Privacy | $15-$25/ft | $25-$45/ft |
| Wood Picket | $8-$15/ft | $15-$30/ft |
| Chain Link | $8-$15/ft | $15-$30/ft |
| Aluminum | $20-$30/ft | $30-$50/ft |
Additional Materials Needed
- Post Caps: 1 per post (decorative)
- Gate Hardware: Hinges, latches for each gate
- Rails: 2-3 horizontal rails per panel
- Concrete: For setting posts
- Nails/Screws: For attaching pickets
- Fence Staples: For attaching wire (chain link)
Installation Tips
- Call 811: Mark utilities before digging
- Post Depth: Bury 1/3 of post height minimum
- Concrete: Set posts in concrete for durability
- Treated Lumber: Use pressure-treated for ground contact
- Grading: Follow property line and maintain slope
- Finishing: Stain or seal wood fences regularly
Post Spacing Guidelines
| Fence TypeRecommended Spacing | Reason | |
|---|---|---|
| Wood Privacy | 6-8 feet | Prevent sagging |
| Picket | 8 feet | Adequate support |
| Vinyl | 6-8 feet | Manufacturer spec |
| Chain Link | 10 feet | Tension wire support |
Frequently Asked Questions
Related Calculators
Calculate concrete volume for slabs, footings, columns, and tubes. Get accurate estimates in cubic yards, cubic meters, and bags needed.
Calculate roofing materials, shingles, and costs instantly. Estimates for gable, hip, and flat roofs with waste factor included.
Calculate concrete blocks and mortar needed for walls. Estimate blocks, mortar bags, and costs for standard and custom block sizes.
Calculate concrete volume for slabs, patios, and footings. Get accurate estimates in cubic yards, bags, and cost for concrete pours.
Calculate carpet needed for rooms and stairs. Estimate carpet in square yards and square feet with waste factor included.
Calculate decking materials including deck boards, joists, and screws. Estimate composite, wood, and PVC decking needs.
Calculate siding materials needed for your home. Estimate vinyl, wood, fiber cement siding in squares and linear feet.
Calculate paint and primer needed for interior and exterior projects. Estimate gallons, coats, and costs for walls, ceilings, and trim.
Calculate tile needs for floors, walls, and backsplashes. Get accurate estimates of tiles needed including waste percentage and grout coverage.
Calculate sand volume and weight for construction projects. Estimate sand needed for concrete, landscaping, and playgrounds.
Calculate gravel volume and weight for driveways, pathways, and landscaping. Estimate tons and cubic yards needed.
Calculate asphalt needed for driveways, parking lots, and roads. Estimate hot mix asphalt volume in tons and cubic yards.
Calculate wallpaper rolls needed for any room. Estimate wallpaper, account for pattern repeats, doors, and windows.
Calculate drywall sheets needed for walls and ceilings. Estimate materials including tape, mud, and screws for your project.
Calculate flooring materials for hardwood, laminate, vinyl, carpet, and tile. Estimate square footage, boxes needed, and project costs.
Calculate insulation materials for attics, walls, and crawl spaces. Estimate batts and blown-in insulation by R-value.
Calculate board feet, linear feet, and lumber costs instantly. Estimate lumber for framing, decking, and construction projects.
Calculate electrical load for your home or office. Determine circuit capacity and prevent overloads.